User Manual

Rinnai 10 Portable Room AC OIM
OFF TIMER
1. With the appliance ON, press the TIMER button (35), the Clock
symbol and a ashing OFF timer icon will be displayed.
2. Use the timer / clock adjustment buttons to select the desired
stop time.
3. Press the TIMER button (35) to lock in the time.
4. Set the desired operational modes and temperature.
5. Press the TIMER button (35) to begin timer based operation,
when the set OFF time is reached the appliance will turn OFF.
NOTE
If no buttons are pressed for 10 seconds, clock setting will be cancelled and no change will be
made.
SLEEP FUNCTION
The SLEEP function allows the set temperature to increase and decrease over a 10 hour period at pre-set time
intervals to maintain your comfort while saving energy after the 10 hours has passed the appliance will resume
normal operation (see graph below)..
1. With the appliance ON, press the SLEEP button (36), the SLEEP icon will be displayed and
the 10 hour sleep cycle will begin.
NOTE
If a 10 hour period is too long or if you desire the appliance to turn OFF at a
specic time, then the use of a set OFF timer will allow the SLEEP timer to be over-
ridden and the appliance will turned OFF.
2. Press the SLEEP button (36) at any time to cancel the SLEEP function operation.
3. Press the On / Off button (34) to stop operation.
SWING FUNCTION
The swing function allows adjustment of the air ow by controlling the cool air outlet louvre in either a cyclic or
xed direction.
1. With the appliance ON, press the SWING button (38), an animated SWING icon will be
displayed and the air outlet louvre will begin to cycle.
2. Pressing the SWING button (38) will the stop cyclic motion at a xed direction and the SWING
icon will go out.
Each consecutive press of the SWING button (38) will stop and start the cyclic motion.
3. To return the cool air outlet louvre to the default operational position press the On / Off button
(34) twice (this will reset the appliance).
1:30
A
P
OFFON
22
C
1 1:30
A
P
OFFON
22
C
1 1:30
A
P
OFFON
22
C
1 1:30
A
P
OFFON
22
C
2
1O hours, X°C = Set temperature
1 10 127
1°C
X°C
1°C
0
Program an Off timer for set & forget
operation during Sleep mode
Normal
operation
resumes
Sleep mode
ends
Sleep mode
starts
12:38
A
P
OFFON
22
C
12:38
A
P
OFFON
22
C
OPERATION