User Manual

Rinnai 8 Portable Room AC OIM
IMPORTANT
Before operating this appliance ensure that the location, installation and condensation
requirements have been met, refer to installation instructions starting on page 13 for details.
For the best cooling results ensure that the lters are clean, refer page 11 for details.
When the appliance is plugged and the power point is turned on a single beep will be heard and
the cool air outlet louvre will cycle open and closed once, this is normal.
BASIC OPERATION
There are three basic operational modes available, these are COOL (chilled air operation), DRY (chilled and
dehumidied operation) and FAN (fan only operation).
BASIC OPERATION CONTROL PANEL
COOL
1. Press the On / Off button (28).
2. Press the mode button (24) until the COOL mode indicator is illuminated.
3. Use temperature buttons (26) to select the desired temperature (16°C to 32°C)
4. Use fan speed button (22) to select the desired fan speed (LOW, MED or HIGH).
5. Press the On / Off button (28) to stop operation.
DRY (DEHUMIDIFYING)
1. Press the On / Off button (28).
2. Press the mode button (24) until the DRY mode indicator is illuminated.
3. Use temperature buttons (26) to select the desired temperature (16°C to 32°C)
4. Press the On / Off button (28)
FAN
1. Press the On / Off button (28).
2. Press the mode button (24) until the FAN mode indicator is illuminated.
3. Use fan speed buttons (22) to select the desired fan speed (LOW, MED or HIGH).
4. Press the On / Off button (28)
NOTE
The most recent basic operational settings are stored in the appliances memory.
If the appliance is not disconnected from the mains power supply then these setting will be
available the next time the appliance is turned on via the On / Off button (28).
BASIC OPERATION REMOTE CONTROL
The remote controls allows for convenient operation of the appliance within a 15 metre range. Note that a
conrmation beep sounds to conrm that a successful controller input has been received by the appliance
COOL
1. Press the On / Off button (34).
2. Press the mode button (31) until the COOL mode indicator is illuminated.
3. Use temperature buttons (37) to select the desired temperature (16°C to 32°C)
4. Use fan speed buttons (39) to select the desired fan speed (LOW, MED or HIGH).
5. Press the On / Off button (34) to stop operation.
12:38
A
P
OFFON
22
C
OPERATION