User Manual

Rinnai 12 Portable Room AC OIM
SAVE A SERVICE CALL
SYMPTOM POSSIBLE CAUSES POSSIBLE SOLUTIONS
Appliance will not operate. Not plugged into power. Plug into power.
Power switch OFF. Switch power ON.
Timer Function set. Wait or reset timer function.
Power to Appliance but it will not start. After switching off the appliance
there may be a 3 minute delay
before it may be re-started.
Wait 3 minutes.
Room temperature is lower
than the set temperature.
Adjust the set temperature
to be lower than the room
temperature.
P1 appears on the display. Drain the water from the drain
outlets.
The air conditioner does not generate
enough cool air.
The air intake lters are blocked Clean air lters.
The set temperature is too
high.
Adjust the set temperature to
a lower temperature.
Drafts from open windows and
doors.
Close windows and doors
in the area you want to be
cooled.
Other heat sources in the room. Remove or turn off heat
sources.
Cooling space too big. Operate the appliance within
the required cooling capacity.
Too noisy or vibrating. Operating surface not level Move the appliance to level a
operating surface.
Splashing sound. High level of condensate being
generated.
This is normal. This appliance
has a pump that evaporates
some condensate through the
exhaust duct.
WHEN TO CALL FOR SERVICE
SYMPTOM CAUSE
There is a burning smell and a strange
sound coming from the unit.
When operated if a circuit breaker
(safety, ground) is thrown or a fuse is
blown.
Turn off the air conditioner, and contact Rinnai.
CARE & MAINTENANCE