Engineering Specs

ManualsBrandsRinnai ManualsGas Heaters2150 SE 25,000 BTU Natural Gas Overhead Patio Space Heater in Black

HVAC Guideline Specifications

SE+ Series

Packaged High Intensity Luminous Infrared Radiant Gas Heater

Commercial/Industrial Applications

Size Range: 23,000 to 35,000 Btuh Input Rating

Models:

Description

Part # NG

Part # LPG

Input (Btuh)

RSEP1S25P/N

S/S Screen; Aluminized Steel Covers

RSEP1S25N

RSEP1S25P

23,000

RSEP1S35P/N

S/S Screen; Aluminized Covers

RSEP1S35N

RSEP1S35P

35,000

Part 1 — General

1.01 SYSTEM DESCRIPTION

Outdoor / Indoor approved overhead mounted, electrically controlled patio and high intensity infrared

radiant heating unit utilizing gas combustion for heating as supplied by Rinnai.

1.02 QUALITY ASSURANCE

A. Heater will be tested and approved in accordance with ANSI Z83.19b / CSA 2.35b (latest version)

High Intensity Gas-Fired Heaters (indoor use), and additionally in accordance with ANSI Z83.26 /

CSA 2.37 (latest version) Outdoor Gas-Fired Patio Heaters and certified by CSA International.

B. Each heater will be subjected to run testing on the assembly line.

C. The heater will be warranted by the manufacturer for defects in material and workmanship for a

period of 3 years on the burner assembly and ceramic tiles that comprise the burner panel, and 1

year on all other parts and components.

1.03 DELIVERY, STORAGE, AND HANDLING

Heater will be stored to secure against damage and handled per manufacturer’s recommendations.

Part 2 — Product

2.01 EQUIPMENT (STANDARD)

A. General:

Factory assembled, single-piece infrared radiant heating unit for overhead mounted patio, space or

area heating application. Supplied with the heater will be all necessary factory installed wiring,

piping, and controls required prior to field installation and start-up.

B. Heater Body Construction:

1. Models: RSEP1S25P/N and RSEP1S35P/N

a. The heater wrap screen will be constructed of 409 grade stainless steel sheet metal.

b. The end cover, top cover and internal sheet metal components will be constructed of high

grade aluminized steel.

c. All exposed surfaces of exterior sheet metal components will have a coating of high

temperature flat black emissive coating.

C. Burner Construction and Emitting Surface:

1. General:

a. Burner body will be constructed of high grade aluminized steel

b. The radiant surface will be comprised of a panel of porous ceramic burner tiles with

indentation surface technology creating 372 indentations in the tile radiating surface that

increases the emitting surface area by 50%.

Summary of content (5 pages)

PAGE 1
HVAC Guideline Specifications SE+ Series Packaged High Intensity Luminous Infrared Radiant Gas Heater Commercial/Industrial Applications Size Range: 23,000 to 35,000 Btuh Input Rating Models: RSEP1S25P/N Description Part # NG Part # LPG Input (Btuh) S/S Screen; Aluminized Steel Covers RSEP1S25N RSEP1S25P 23,000 RSEP1S35P/N S/S Screen; Aluminized Covers RSEP1S35N RSEP1S35P 35,000 Part 1 — General 1.
PAGE 2
c. Ceramic tiles will have a homologous grid of approximately 3400 needled perforations that differ not more than +/- 0.001 inch (0.03 mm) in diameter to create a homogeneous radiant surface. d. Ceramic tiles will have machined perimeter edges so that the burner panel assembly requires no gasket material between contiguous tiles. e. The perimeter of the ceramic tile burner panel will be seated to the heater body utilizing an innocuous ceramic gasket material. f.
PAGE 3
4. Heater Zone Temperature Control: a. Space Heating: Each heater zone will be controlled by a 24 Vac infrared set-back thermostat (refer Part 4.01), or other 24 Vac thermostat as supplied by the manufacturer b. Outdoor Patio Comfort Heating: Heaters or heater zones will be controlled by a Patio Control Panel (refer Part 4.02) as supplied by the manufacturer 5. Indoor Installation Requirements and Mechanical Exhaust: a. Installation in Canada: i.
PAGE 4
(Test B methodology). The convection heat coefficient of the appliance will not be more than 55% for inputs up to 50,000 Btuh. 3.04 Submissions - Proof of Performance The project submission will include written results of the radiant coefficient testing of the complete heater as produced by CSA International or other accredited certification test facility.
PAGE 5
a. ELECTRICAL: The Patio Control Panel will provide 24 Vac power to the heaters. The installer will provide a 120V/24V/60HZ transformer with a minimum capacity of 40VA for the first heater plus 20VA for each additional heater to be controlled by the panel. 4.03 Other Heater Ancillaries A. Gas Connection Each heater will be connected to the gas supply piping using an approved ½” x 24” stainless steel flexible gas connector (903000013) as supplied by the manufacturer of the heater. B. Mounting Options: a.