Spec Sheet

(PPtl) - Polypropylene
Ø2/4 in. (60/100) Ubbink Vent Components (for U.S.)
• For use with the following models: RU199i (REU-N3237FF-US),
RU180i (REU-N2934FF-US), RU160i (REU-N2530FF-US),
RU130i (REU-N2024FF-US), RUR199i (REU-NP3237FF-US),
RUR160i (REU-NP2530FF-US), CU199i (REU-N3237FFC-US),
CU160i (REU-N2530FFC-US).
• Do not combine the vent components illustrated on this page
with any other vent components.
• Material of Inner/Exhaust - Polypropylene.
• Material of Outer/Combuson Air - Plasc.
• Vent components consist of an outer plasc vent for air
intake Ø4 in. (100 mm) and an inner polypropylene vent for
the exhaust gases Ø2 in. (60 mm).
• PPtl material is not approved for use in Canada.
(PPtl) POLYPROPYLENE VENT COMPONENTS
38 in. (965mm)
20.3 in. (516mm)
L
2/4 (60/100) Condensing Horizontal
Terminaon Kit
(terminaon, elbow, rubber wall plates)
2/4 (60/100) Condensing
Roof Discharge Terminaon
20 in. above Roof
Part #: 224359
Refer to the Rinnai Water Heater Installaon and Operaon manual for complete installaon details and requirements.
Rinnai is connually updang and improving products; therefore, specicaons are subject to change without prior noce. Local,
state, provincial and federal codes must be adhered to prior to installaon.
2/4 (60/100) Condensing
Horizontal Starter Adapter
Part #: 229252
2/4 (60/100) Condensing
Vercal Starter Adapter
Part #: 227413
Ø3/5 in. (80/125) connecon
Ø2/4 in. (60/100) connecon
3.3 in.
(84mm)
7.9 in.
(200mm)
Maximum wall
thickness “L”
Part Number
12 in. (305 mm) 229031
21 in. (533 mm) 229032
L
2/4 (60/100) Condensing Vent
Pipe Extension
Length “L” Part Number
10 in. (254 mm) 229318
19.5 in. (240 mm) 229319
39 in. (991 mm) 229320
2/4 (60/100) Rubber Wall Plate
Part #: 710265 (White)
Part #: 711262 (Gray)
6.6 in.
(168mm)
2/4 (60/100) Condensing
90 Degree Diverter Nose
Part #: 710202NPP
2/4 (60/100) Condensing
45 Degree Diverter Nose
Part #: 710215NPP
4.9 in. (124mm)
2.0 in.
(51mm)
2/4 (60/100) Condensing
45 Degree Elbow (Qty. 2)
Part #: 229208
Retrot Wall Plate
Part #: Gray: 188486
White: 188481
3.35 in. (85mm)
4.0 in.
(107mm)
2/4 (60/100) Condensing
90 Degree Elbow
Part #: 229233
Flashing for Metal Roof*
Part #: 242141
Roof Flashing Assembly- Flat*
Part #: 146141
Universal Bug Guard*
Part #: 224042
2/4 (60/100) Thimble
Part #: 224055
Fits 2x4 or 2x6
Wall Construcon
Pipe Clamp
Universal Plasc*
Part #: 169044
4.15 in. (105mm)
Roof Flashing*
2/4 (60/100) Condensing 21 in. Wall Terminaon
(includes 2 wall plates)
Part #: 229033
Roof Pitch Part No.
Shingle Roofs
Part No.
Tile Roofs
1/12 to 6/12 189950 50171949
6/12 to 12/12 189951 50171961
8/12 to 16/12 189952 50171954
2/4 (60/100) Pipe Clamp
Metal
Part #: 169013
*Components are universal for
use with 2/4(60/100) and 3/5
(80-125) components.
8.6 in.
(218mm)
Ø4.0 in. (102mm)
2/4 (60/100) Horizontal—
Flashing Panel
Part #: 102000022
12.25 in.
(311mm)
Ø3/5 in. (80/125) connecon
Ø2/4 in. (60/100) connecon
2/4 (60/100) Vent Support Bracket
Part #: 224056
Rinnai Corporaon • 103 Internaonal Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: [phone] • www.rinnai.us
© 2019 Rinnai Corporaon
Ubbink-PP24US-SP-00 11/2019
4.6 in.
(117mm)
19.5 in. (495mm)
2/4 (60/100) Condensing Roof
Terminaon Extension Kit
Part #: 185348NPP