Installation Manual

Rinnai Tankless Rack System (TRS) Installation Manual 33
• Idenfy the installaon locaon and conrm that the installaon will meet all required clearances.
• The size and embedment specied are for anchors installed in stone or aggregate concrete only. For other
anchorage details, the contractor or engineer on record for the building shall consult with a licensed structural
engineer for all anchorage of equipment not specied in this manual.
• In the event of a conict or inconsistency between items indicated in this manual regarding code requirements,
the more stringent standard shall prevail.
• Using the holes in the wall bracket, securely aach the rack to the wall. Ensure that the aachment strength is
sucient.
• Reference local codes regarding minimum concrete thickness and use appropriate expansion anchors that are
capable supporng the rack system weight.
• Wall-Mount (In-Line) rack model includes:
THE WALL MUST BE CABABLE OF CARRYING THE OPERATING WEIGHT OF THE INSTALLED TRS
SYSTEM. CONSULT A STRUCTURAL ENGINEER FOR STRUCTURAL ANALYSIS OF THE WALL AND
APPROPRIATE HANGING METHODS BEFORE ATTEMPTING TO HANG THE TRS SYSTEM. FAILURE TO COMPLY WITH THE
ABOVE REQUIREMENT COULD RESULT IN SUBSTANTIAL PROPERTY DAMAGE, SEVERE PERSONAL INJURY OR DEATH.
WARNING
Brackets are
located on both
sides of rack
TRS23ILWCU
Secure Wall-Mount (In-Line) Racks