Installation Manual

34 Rinnai Tankless Rack System (TRS) Installation Manual

THE WALL MUST BE CABABLE OF CARRYING THE OPERATING WEIGHT OF THE INSTALLED TRS

SYSTEM. CONSULT A STRUCTURAL ENGINEER FOR STRUCTURAL ANALYSIS OF THE WALL AND

APPROPRIATE HANGING METHODS BEFORE ATTEMPTING TO HANG THE TRS SYSTEM. FAILURE TO COMPLY WITH THE

ABOVE REQUIREMENT COULD RESULT IN SUBSTANTIAL PROPERTY DAMAGE, SEVERE PERSONAL INJURY OR DEATH.

WARNING

• Idenfy the installaon locaon and conrm that the installaon will meet all required clearances.

• In the event of a conict or inconsistency between items indicated in this manual regarding code requirements,

the more stringent standard shall prevail.

• Wall-hanging rack models include: TRW02CU, TRW03CU, TRW23CU, TRW02SE, TRW02ST, TRW03ST, TRW02HE,

TRW02HEX, TRW03HE, and TRW03HEX

Using the holes in the wall hanging

bracket, securely aach the

bracket level to the wall. Ensure

that the aachment strength is

sucient.

Secure the front of the bracket to

the front of the wall hanging frame

with a #12 X 3/4 drill point screw.

Li the wall hanging rack and insert

the top of the frame into the

bracket.

Secure Wall-Hanging Racks (TRW Models)

Instrucons