Service Manual

2 Rinnai Corporation Conversion Manual
Safety Symbols
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and
others.
DANGER
CAUTION
WARNING
Technical Data ........................... 2-3
Parts List ....................................... 3
Gas Conversion Procedure ........... 4
Adjust Gas Pressure Settings ....... 5
Check Operation ........................... 6
Operating Instructions ................... 7
FOR INSTALLATIONS IN CANADA, THE CONVERSION SHALL BE CARRIED OUT IN ACCORDANCE WITH
THE REQUIREMENTS OF THE PROVINCIAL AUTHORITIES HAVING JURISDICTION AND IN ACCORDANCE
WITH THE REQUIREMENTS OF THE CGA-B149.1, NATURAL GAS AND PROPANE INSTALLATION CODE.
The appliance must be installed in accordance with:
• local codes or, in the absence of local codes, the National Fuel Gas Code, ANSI Z223.1/
NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.
• the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 and/or
CAN/CSA Z240 MH Series, Mobile Homes, Series M86.
Natural Gas (Gaz Naturel)
Minimum - Maximum supply gas pressure
(Pression de gaz d'alimentation - Minimum - Maximum)
MIN 4.5 in (114 mm) W.C.
MAX 10.5 in (267 mm) W.C.
Propane Gas (Gaz propane)
Minimum - Maximum supply gas pressure
(Pression de gaz d'alimentation - Minimum - Maximum)
MIN 8 in (203 mm) W.C.
MAX 13.5 in (343 mm) W.C.
Technical Data (Données Techniques)