Instructions / Assembly

RinseKit - FAQs
What is a RinseKit? The revolutionary RinseKit is a portable pressurized shower system
that’s like having a garden hose at the beach or trailhead.
How does it work? The RinseKit hose quickly attaches to your water spigot with a quick
connect coupler and fills the two gallon eon™ pressure chamber with approximately 65
psi of water pressure (standard home pressure) in 20 seconds time — and can hold
pressure for up to one month. Simply attach the spray nozzle to the RinseKit hose with
the quick connect, select one of the 7 spray settings and fire away! This patented design
has no moving parts and can be filled with hot or cold water an infinite number of times.
Do I have to pump it up to get the pressure inside? No pumping is necessary when you fill
it with a standard hose spigot. However, in the near future we will be offering the
'Remote Refill Accessory' which will allow you to fill the RinseKit with still water and
quickly pressurize the system with a standard bike pump.
Are there batteries inside? No batteries, No moving parts. No nuclear reactors.
How do I know when it’s filled? It should take approximately 20 seconds to fill
completely. You can hear when the water stops flowing in and then you'll know it's full.
Don't worry, you can't overfill the RinseKit or blow it up if you get distracted while filling
it.
How much water does it hold? 2 gallons
How long will it maintain pressure? It will hold it's full pressure for at least one month.
How long will it spray for? Your RinseKit will give you around 2-3 minutes of pressurized
spray, depending on the pressure of the hose spigot that you filled it with.
How heavy is it? RinseKit weighs 24lbs when it's full and 9 pounds when it's not.
What if I want a hot shower? It’s insulated, so you can fill it with hot water and it will stay
nice and warm for you. Coming soon, we will have an accessory heater that plugs into
your car A/C adapter that will allow you to heat up the water on the drive to your next
adventure.