PRODUCT GUIDE • FILLING INSTRUCTIONS • MAINTENANCE • PRODUCT SAFETY • PRODUCT WARRANTY • ACCESSORIES
ABOUT RINSEKIT RinseKit is a pressurized portable shower. Unlike other portable showers on the market, RinseKit requires no batteries or pumping to create its pressure. RinseKit fills in 30 seconds or less and has the ability to spray for up to four minutes depending on the setting of the spray nozzle. RinseKit comes with a six-foot hose and a sprayer nozzle with seven different settings. The removable lid is versatile and can be used as a seat, cutting board or a place to stand on while cleaning up.
RINSEKIT® INCLUDED PARTS RinseKit is self-contained and ready to use.
HOW TO FILL YOUR RINSEKIT 1 Turn off valve on RinseKit hose. 50sec 50sec on hose bib adapter 4 Screw directly to hose bib. 04 Find a video format of this at www.rinsekit.com/faq down blue sleeve to release 2 Slide quick connect from the nozzle. a hose bib connected 3 Locate to your home. 50sec 5 Attach quick connect to hose bib adapter. You will hear the quick connect click when it locks in place. 6 Turn on RinseKit valve.
0sec on hose bib and allow 30 7 Turn seconds for the RinseKit to fill. 50sec 50sec 8 Turn off hose bib. 9 Turn off RinseKit valve. (You cannot overfill the RinseKit) down blue quick connect 10 Pull sleeve to disconnect hose from hose bib adapter. nozzle into quick connect. 11 Insert You will hear the quick connect click when it locks on to the nozzle.
HOW TO FILL YOUR RINSEKIT WITH HOT WATER There’s nothing like a warm shower! Fill your RinseKit with warm or hot water with the Hot Water Adapter Accessory. SOLD SEPARATELY 06 1 The sink sink adapter ts two typesof of faucets faucets The adapterfifits 2 types Unscrew andand remove faucet screen parts. Unscrew remove faucet screen You may need to use a wrench. parts. You may need to use a wrench. 2 Insert sink Insert sink adapter to adapter faucet. to faucet.
DRAINING AND MAINTENANCE It’s normal to have some excess water remain inside your RinseKit after use. It is recommended that you drain your RinseKit every 15 uses for optimal performance. Locate the drain plug on your RinseKit. Unscrew the drain plug. (counter-clockwise) You may need a wrench to loosen the drain plug. Keep drain plug so you can screw it back in after draining your RinseKit. Keep O-Rings clean of sand and debris. Find a video format of these and more at www.rinsekit.
RINSEKIT® LIMITED WARRANTY Subject to the below conditions and exclusions, OutSol, LLC (“OutSol”) warrants the RINSEKIT and the accessories included in the box (the “Product”) against defects in materials and workmanship under normal and personal use by the original end user/customer (“You”) for a period of 1 year (twelve months) from the date of the original retail purchase.
OUTSOL MAKES NO OTHER REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED. EXCEPT AS SPECIFICALLY SET FORTH ABOVE, ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. IN NO EVENT SHALL OUTSOL BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR OTHER LOSS ARISING OUT OF OR IN CONNECTION WITH YOUR ABILITY OR INABILITY TO USE THE PRODUCT UNDER THIS LIMITED WARRANTY.
RINSEKIT® PRODUCT SAFETY ANTICIPATED DANGERS: · Pressurizing the unit to more than 80 PSI may rupture the tank and create a safety hazard · Transporting a pressurized unit in an aircraft may create a safety hazard · Transporting a pressurized unit to a higher altitude may create a safety hazard · Filling the unit with a flammable fluid may cause an explosion · Filling the unit with a combustible fluid is really dumb and may cause an explosion · Filling the unit with a corrosive material will damage the unit
