User manual
Table Of Contents
- Rio Cali
- User’s Guide
- Package Contents
- Copyright/Trademarks
- Table of Contents
- Chapter 1 Getting Started
- Chapter 2 Connections
- Chapter 3 Software Setup
- :: Windows
- 1 Place the installation CD label-side up into the computer’s CD-ROM drive. The Rio installation ...
- 2 Click Rio Music Manager INSTALL NOW (required) and follow the on-screen instructions. Additiona...
- 3 If prompted, reboot the computer when the installation is complete.
- 4 Double-click the My Computer icon, , on the Windows desktop.
- 5 Double-click the CD-ROM icon, .
- 6 Double-click the Install icon, .
- 7 Go to Step 2.
- Rio Music Manager
- RealOne Player
- 1 Place the installation CD label-side up into the computer’s CD-ROM drive. The Rio installation ...
- :: Mac
- :: Windows
- Chapter 4 Basic Operations
- :: Basic Operations
- :: Copy
- :: Transfer
- Rio Music Manager
- 1 Launch the Rio Music Manager.
- 2 Click My Music in the left frame to access tracks. Rio Music Manager will scan the computer’s h...
- 3 Select tracks within a category of tracks. Categories include Albums, Artists, Genres, Songs, a...
- 4 Use any of the following techniques to select files:
- 5 After the tracks have been selected they can be copied to the Rio Cali by clicking .
- 1 Launch the Rio Music Manager.
- RealOne Player
- 1 Launch RealOne Player.
- 2 Connect the player to a computer using the USB cable.
- 3 Power the Rio Cali on.
- 4 Click DEVICES at the bottom of the RealOne Player window. The Devices window is displayed.
- 5 Double-click Rio Cali.
- 6 Click ADD CLIPS in the command bar at the bottom of the RealOne Player window. The Add Clips wi...
- 7 Select the tracks to be transferred to the Rio Cali. Click Add Clip to queue the tracks to be t...
- 8 Click TRANSFER in the command bar at the bottom of the window to begin transferring the selecte...
- 1 Launch RealOne Player.
- iTunes
- Rio Music Manager
- :: Control
- :: Play
- :: Play Music
- :: Tuner
- Chapter 5 Advanced Features
- Chapter 6 Help
- :: Troubleshooting
- :: Glossary of Digital Audio Terms
- :: Limited Warranty and Software License
- :: FCC and Industry Canada Compliance
- :: Safety
- Index
![](/manual/rio-audio/mp3-player-cali/user-manual-english/images/img-12.png)
Contents Index
8
Rio Cali
Chapter 2 Connections
:: Basic Connections
This chapter describes how to connect the Rio Cali to Earphones, Mini USB cables, and alternate devices. Basic
connections include:
Battery
The Rio Cali uses a single AAA-battery that can provide many hours of use. The battery compart-
ment cover must be removed before a battery can be installed.
Earphones
Connect the supplied earphones to the EARPHONES port on the top of the player.
USB
The player must be connected using the included USB cable to the USB port on your computer to trans-
fer music or files to and from the player and your computer.
USB Detection with the Windows Device Driver
USB connectivity is ready to work immediately after Rio Music Manager has been installed.
If for any reason the Windows Device Driver Wizard is displayed after the USB cable has been
plugged into both the Rio Cali and the computer, please follow these steps:
1 Confirm the Rio installation CD is in the computer’s CD-ROM drive.
2 Check the CD-ROM Drives box when the Windows Device Driver Wizard requests the
location of the Rio Cali drivers.
3 Click Next and follow the Windows Device Driver Wizard instructions.