Operation Manual

Page 16
Accessories
Headphones
Choose from:
• Over-the-ear headphones
• Over-the-head headphones
• Neck band sport headphones
Order online from the Rio e-store
RioTone Faceplates
Available in a variety of colours and designs.
Removing the faceplate
1 Press the button on the back of the Rio 600 to detach the backpack.
2 Remove the backpack from the Rio 600.
3 Small tabs on the back of the faceplate attach it to the front of the Rio.
Holding the Rio in one hand, grasp the left side of the faceplate with your
other hand and pull up to unclip the left side of the faceplate from the front of the Rio.
4 Remove the faceplate from the front of the Rio.
Attaching the faceplate
1 First, remove the backpack and any existing faceplate attached to the Rio.
2 Insert the tab by the Liquid Crystal Display (LCD) opening on the back of the new faceplate into
the slot on the front of the Rio on the right side by the LCD.
3 Press the faceplate onto the front of the Rio, until the small tabs that clip the faceplate to the Rio
snap completely into place. When the faceplate is attached, a tab is visible in the small window in
the battery well in the back of the Rio.
4 Replace the backpack.
Order online from the Rio e-store
Rio 600 XtraStuff
Includes:
• Carrying case with belt clip
• One RioTone faceplate
• Headphone Remote: Provides convenient access to Hold, Volume, Menu, Play/Pause, Forward,
Stop and Reverse controls. Two foot cord includes function control pad, 1/8” right angle stereo
connector (male) and a 1/8” stereo jack (female) connects to any headphones.
Order online from the Rio e-store