Electrolysis Hair Remover (CNHR2) Version 1.
Product Overview Electrolysis Hair Remover (CNHR2) Simple and easy hair removal The Rio Electrolysis Hair Remover uses micro current electrolysis technology to destroy the hair at the root, resulting in permanent hair removal.
Product Overview Electrolysis Hair Remover (CNHR2) The micro current changes the pH in the hair follicle to alkaline which then starts to attack the hair root and papilla cells (it is these cells which are responsible for hair growth). This action continues for some time after the treatment is complete and the hair has been removed. It is not always possible to kill all of the papilla cells in a single treatment and in these situations the hair may regrow.
Product Overview Electrolysis Hair Remover (CNHR2) The destruction of the hair root cells continues for some time after the treatment has finished. It makes no difference whether you remove the hair immediately or not. If there is a particularly stubborn hair, an additional treatment or longer treatment time may be required. As with all hair removal treatments it is recommended that the area you have treated is washed with cool water and a mild antiseptic cream applied.
Main Features Electrolysis Hair Remover (CNHR2) Advantages of the Electrolysis Hair Remover: •Quick and easy hair removal •Suitable for facial hair •Ideal for all hair types
Electrolysis Hair Remover (CNHR2) CLEANSING PRE-TREATMENT STEP 1 Wash area to be treated with warm water and mild soap. This will remove any excess oil from the skin. STEP 2 Check the speed control is on minimum, turn the unit on with On/Off button. The On/Off light will illuminate and bleep twice. STEP 3 Turn the Control dial to suit the type of hair being treated. The treatment time varies between five and thirty seconds depending on the setting.
How To Use Electrolysis Hair Remover (CNHR2) CLEANSING PRE-TREATMENT CONT… STEP 6 The amber treatment light will start flashing, indicating the treatment is in progress. If the amber light does not come on, check the tweezers are plugged in and that you are making a good contact with the hair at the point where it meets the skin. STEP 7 When the treatment is complete you will hear a short bleep and the green ‘treatment complete indicator’ will illuminate.
Tech Spec Electrolysis Hair Remover (CNHR2) Contents: •Console •Tweezers •Conductive gel •9V PP3 battery •Power Levels: Analogue – user selectable •Packed Product Dimensions: (height x width x depth) 243 x 205 x 113 mm •Un-packed Product Dimensions: (height x width x depth) 75 x 150 x 150 mm •Battery Operated/Type: 9V PP3 alkaline battery •Packed Weight (Kg): 0.629kg •Product Net Weight (Kg): 0.
