manual

Electrolysis Hair Remover (CNHR2)
CLEANSING PRE-TREATMENT CONT…
STEP 6 The amber treatment light will start flashing, indicating the treatment is in
progress. If the amber light does not come on, check the tweezers are
plugged in and that you are making a good contact with the hair at the point
where it meets the skin.
STEP 7 When the treatment is complete you will hear a short bleep and the
green ‘treatment complete indicator’ will illuminate. The hair can now be
removed by increasing the pressure on the tweezer button to pluck the hair
out of the hair follicle. (The unit will then automatically reset itself to start
again).
STEP 8 If contact with the hair is broken during treatment the amber treatment
light will go out and the unit will bleep three times. If the contact is not re
established within three seconds the treatment timer will assume you have
moved onto a fresh hair and will restart the treatment programme.
How To Use