Owner`s manual
4141
Features of your vehicle
VOICE COMMAND
Starting Voice Command
• To start voice command, shortly press
the key on the steering wheel
remote controller.
• If voice command is in [Normal Mode],
then the system will say “Please say a
command. Beep”
❈ If voice command is in [Expert Mode],
then the system will only say a “Beep-”
❈ Setting Voice command [Normal
Mode]/[Expert Mode]:
Press the key Select [System]
through the TUNE knob or
key Select [Prompt Feedback] through
the TUNE knob Set [Normal
Mode]/[Expert Mode]
• Say the voice command.
5
SETUP
CAUTION
For proper voice recognition, say
the voice command after the guid-
ance message and the “Beep”
sound.
(Continued)
• After downloading Bluetooth
®
wireless technology contacts, the
system requires some times to
convert the contacts into voice
information. During this time,
voice recognition may not oper-
ate properly.
• Upon inputting your contacts,
special symbols and numbers
cannot be recognized by voice.
For example,“# John Doe%&” will
be recognized as “John Doe”.
CAUTION IN USING
VOICE COMMAND
• The voice recognition feature of
this product supports recognition
of the commands listed within
this user’s manual.
• While using voice recognition,
operating the steering remote
control or the device will termi-
nate voice recognition and allow
you to manually operate desired
functions.
• Position of the microphone is
above the head of the driver’s
seat. For superior performance,
maintain good posture when say-
ing voice commands.
• Voice recognition may not func-
tion properly due to outside
noise. The following conditions
can affect the performance of
Voice Recognition:
- When the windows and sunroof
are open
- When the heating/cooling sys-
tem is on
- When passing a tunnel
- When driving on rugged and
uneven roads
(Continued)