user guide © Copyright The Dezac Group Ltd.
© Copyright The Dezac Group Ltd.
WARNINGS © • Please read all instructions thoroughly before using the product and retain for future reference. • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have Copyright TheorDezac Groupthe Ltd. been given supervision instruction concerning use of2014 the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
WARNINGS © • This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance. • If any part of the mains adapter or cord are damaged, discontinue use. Contact Customer Care to arrange a replacement. blackGroup skin complexions or2014 for • Not suitable for Afro-Caribbean, Copyright The Dezac Ltd. Grey Hair. See “Skin Types and Power Level Guide” section.
© • Inbuilt safety features protect the eye being exposed to the laser, however, never aim the unit at or near eyes. • Do NOT use near flammable materials. • Reflection Hazard: Please remove all jewellery in the vicinity of the treatment area before use. • Do not treat the same hair repeatedly in any one session. Copyright Ltd. 2014 • Do not use after The drinkingDezac alcohol or if Group you are feeling unwell or fatigued.
WARNINGS © • This is a sensitive laser scanning product. Care should be taken to avoid damage to the mechanism in the unit. • Do NOT dismantle or repair. If you have any problems using the product, contact our Customer Care Department. • Misuse of the unit can cause harm. Group Ltd. 2014 Copyright The Dezac • Do NOT override any safety features or open the unit. • Keep unit away from strong electromagnetic fields and magnets during use.
THE SCIENCE LASER TECHNOLOGY Go Laser hair removal works by sending a laser beam to the hair follicle with enough energy to permanently disable the root without affecting the surrounding area. The result is permanent hair reduction. Simple to use, laser hair removal is suitable for unwanted face or body hair. Skin and hair contains a natural pigment called melanin.
KNOW YOUR GO LASER 5 1 Touch pins (x2) 1 2 6 7 3 8 2 Laser aperture 9 0 3 Treatment Indicator Ring $ 4 Treatment button 5 Blue treatment light 6 Power level increase button (+) © Copyright The Dezac Group Ltd.
POWER LEVELS 5 4 3 2 1 © Copyright The Dezac Group Ltd.
What you should expect to feel? You may feel individual hairs being treated, which is like a mild pin prick, and a slight warming of the area being treated. However, most people don’t feel anything. © Copyright The Dezac Group Ltd.
Who should not use Go Laser? Laser hair treatment is not suitable for the following skin tones or hair types: • • Afro-Caribbean or black skin complexions – the concentration of melanin in the skin is too high White or grey hair – insufficient melanin present in the hair The table on the following page can be used to establish whether laser hair removal is suitable, and if so, which level should be used. © Copyright The Dezac Group Ltd.
SKIN TYPES AND POWER LEVEL GUIDE Skin Colour Tanning History Very fair, “transparent” Always burns, never tans Fair Always burns Fair to light olive Burns mildly Olive/Tanned Rarely burns, tans with ease Dark brown Very rarely burns Black Never burns Maximum Power level Subject to patch test all 5 power levels can be used © Copyright The Dezac Group Ltd.
GETTING STARTED PATCH TEST ✓ 24 hours before treatment check for any reaction by treating a small area first. The + and - buttons increase or reduce power levels. Treat several areas on each power level up to the maximum power level for your skin type (see table). If you feel any discomfort, the previous lower power level is the maximum power level you should use. © Copyright The Dezac Group Ltd. 2014 A slight redness may occur, but not always, within an hour of treatment.
How should I prepare my skin? Laser hair removal does not require any special skin preparations, although you should always ensure your skin is clean. Laser hair removal is most effective on pale skin so we recommend avoiding sunbathing, sun beds and fake tanning if possible. How should I prepare the hairs? Shave the areas to be treated. This ensures the laser goes directly to the hair root and avoids hair burning on the surface. © Copyright The Dezac Group Ltd.
SECURITY FEATURES Security key The key allows the unit to be safely locked when not in use. OFF ON Insert the security key and unlock by turning clockwise so that when the security key is removed, the arrow lines up with the green dot. © Copyright The Dezac Group Ltd.
SECURITY FEATURES When the security code sequence is correctly entered, the unit will emit a beep and the blue lights around the scan mode button and single hair mode button will flash ready for selection. The lowest power level Indicator light will also illuminate. Note: The unit will ‘lockout’ if the code is incorrectly entered. This is indicated by all five power levels flashing. Turn the security key off, wait a few seconds and then turn the key back on. Re-enter the correct security code.
TREATMENT MODES The treatment modes sequentially target single hairs in each treatment. scan mode - multiple hair single hair mode - single hair treatment area treatment area indentation mark indentation mark Overlap by a third Place opening over hair © Copyright The Dezac Group Ltd. 2014 A small indentation mark will be left by pressing the unit down on the skin. Overlapping the indentation mark slightly with each treatment will ensure effective coverage of the treatment area.
HOW TO USE 1. Connect mains adapter lead into the power socket at the bottom of the unit and plug into the mains. 2. Use ONthe security key to unlock the unit. See security features on page 15. © Copyright The Dezac Group Ltd. 2014 3. Enter the security code sequence from page 15. The scan mode button and single hair mode button will flash blue ready for selection. The lowest power level indicator light will also illuminate.
HOW TO USE 4. Use the +/- buttons to select the correct power level for your skin type. Refer to the power level guide on page 12 to determine what level is suitable for your skin type. Note: Each time the power level is adjusted you will need to repress the scan mode button or single mode button to continue. 5. Select the treatment mode, either scan mode or single hair mode. (see treatment modes on page 17). © Copyright The Dezac Group Ltd.
HOW TO USE 7. Press and HOLD the treatment button to start the laser treatment. The blue treatment light will flash on and off to indicate laser treatment is in progress and the unit will beep repeatedly. When the laser treatment is complete, the blue treatment light will stay illuminated. You can now move onto the next area of hairs to be treated. When moving the unit to the next area of hairs to be treated the touch pins must be removed briefly from the skin.
Note: If you experience unexpected behaviour of this product then it is possible some external electromagnetic interference is responsible e.g. electric motors/loudspeakers etc. You should remove this source and restart the product to restore full operation. At no time will the laser fire unintentionally. © Copyright The Dezac Group Ltd.
AFTERCARE ADVICE How will my skin appear after the treatment? Generally no perceptible changes will be apparent. A slight redness after treatment may occur but will normally fade over 24 hours. Any localised redness after treatment is caused by the destruction of the hair follicles and is quite normal. However, if any redness remains after 24 hours this would indicate you have selected too high a power level for your skin type. Please refer to the “Patch Test” section.
AFTERCARE ADVICE How often can I repeat treatments? As long as the hair follicle or surrounding skin is not red, sore or inflamed, treatment can be repeated after 24 hours. Most people wait 3–4 weeks between treatments to see which hairs have been shed and to identify new regrowth. The timing for follow on treatments is not critical. Choose a time which is convenient for you. Avoid excessive treatment on the same region at one time. This may cause reddening and swelling.
THE HAIR GROWTH CYCLE 1 © Copyright The Dezac Group Ltd.
CLEANING THE LASER APERTURE Periodically check whether there are any smoke deposits on the laser aperture. A build up of deposits will affect the efficiency of the laser. If you notice any deposits, switch the unit OFF and unplug the mains adapter. Then simply clean with a lint free cloth or cotton bud. © Copyright The Dezac Group Ltd.
DO’S AND DON’TS ✓ ✓ ✓ ✓ After use always unplug the mains adapter and store out of reach of children. ✓ ✓ ✓ Always store the unit and do not use it for any other purpose than intended. Only use this product with the mains adapter supplied. To protect the laser, do not store at temperatures exceeding 40ºC. While unplugged, wipe the unit clean with a slightly damp cloth, regularly clean the touch pins and front face of the unit with a cotton bud, to ensure optimum laser output.
TROUBLESHOOTING Problem Solution I have lost my keys. Make a note of the serial number of your product from the base of the unit and contact Customer Care who will be happy to send you a replacement key. The laser treatment is not starting when the treatment button is pressed. Ensure the touch pins are making contact with the skin and you are in a well lit room. © Copyright The Dezac Group Ltd. 2014 No lights are working on the unit.
CHANGING THE SECURITY CODE SEQUENCE You can set your own security code once you have unlocked the unit with the security key and entered the security sequence. BEFORE pressing any other buttons, press these buttons in the following order; treatment button 3 times, scan mode 3 times, single hair mode 3 times and treatment button 3 times. The power level 5 light will flash. Enter your chosen security code sequence of four button presses (excluding the treatment button).
RECOMMENDED FOR YOU Deep Pore Cleanser © Copyright The Dezac Group Ltd. 2014 Uses micro-current technology to cleanse, moisturise, and refresh, leaving the skin invigorated, vibrant and deeply cleansed.
GUARANTEE To register your two year guarantee online, visit: www.riobeauty.com/warranty_online.htm DISPOSAL The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill.
© Copyright The Dezac Group Ltd.
© Copyright The Dezac Group Ltd. 2014 www.riobeauty.com UK Rio, Dezac and Go Laser Hair Remover are trademarks of The Dezac Group Ltd © The Dezac Group Ltd 2014 Manufactured by The Dezac Group Ltd PO Box 17, Cheltenham, England GL53 7ET 1-IN-LAHH-UK/1.