User guide

INTENSE PULSED LIGHT HAIR REMOVER

™

Please ensure you read and understand the ‘Warnings’ section before proceeding.

• Donotuseanyhairremovalmethodthatplucksthehairfromthefollicle,asthisrendersIPLineffective.

• Removealljewelleryinthevicinityofthetreatmentarea.

• Ensureyouhavepatchtestedtheareatobetreated24hourspriortotreatmentandareawareofyourmaximum

power level.

• Your first treatment will always be on power level 1 and can only be increased by one level after a treatment is

performed.

BEFORE YOU START

INCREASINGTHEPOWERLEVEL

EachtimeyouuseyourIPLyouwillneedtodoatreatmentflashoneachpowerlevelbeforeyoucanincreasethe

power to the next level. This is a safety feature to ensure you are aware of the treatment intensity at each level.

Aself-checklastingafewsecondsisperformedwheneverthepowerlevelisincreased.Duringthistime,thepower

levels will illuminate up and down. These self-checks may occur at other times and are important to optimise the

performance of the unit.