User guide

INTENSE PULSED LIGHT HAIR REMOVER

™

STEP 8

The blue lights will go out after the

treatment ﬂash. The unit will also self-

check after each ﬂash. This takes five

seconds, during this time the power

level lights will illuminate up and down.

When moving the wand to the next

area, the skin sensors must be lifted off

the skin.

If you are increasing power for the next

treatment, press the (+) button and

return to step 5.

Important: Do NOT exceed the

maximum power level for your skin type.

AFTER USE

Turn the key anticlockwise to the OFF

position to lock. Remove and store the

key in a safe place away from children.

INCREASINGTHEPOWERLEVEL

Eachtime youuse yourIPL youwill needto doa

treatment flash on each power level before you can

increase the power to the next level. This is a safety

feature to ensure you are aware of the treatment

intensity at each level.

A self-check lasting a few seconds is performed

whenever the power level is increased. During this

time,thepowerlevelswillilluminateupanddown.

INSTRUCTIONS FOR USE