Operation Manual

Index
Troubleshooting
31
Contents
Error message
is displayed on
the computer
screen when
CD encoding
begins
The following factors may interfere with the CD encoding process:
• Over-utilization of the CPU during the encoding process. Close all other software
before encoding.
• Insufficient RAM to cache the track properly. Generally, 64 MB is fine if no other
memory intensive application is running. Close all other software before encoding.
• CD-ROM firmware. Even if a CD-ROM drive is new, it may require a firmware update
from the manufacturer to correct audio extraction errors.
• Overclocking. Overclocking the system — running it faster than it is rated to run —
can have adverse effects on the peripheral components. If your system is over-
clocked, bring it back to its normal operating speed.
Problem Solution