Operation Manual

Index
Troubleshooting
33
Contents
Computer dis-
plays error
message when
CD encoding
begins
The following factors may interfere with the CD encoding process:
• Over-utilization of the CPU during the encoding process. Close all other software
before encoding.
• Insufficient RAM to cache the track properly. Generally, 64 MB is fine if no other
memory intensive application is running. Close all other software before encoding.
Win 98 uses about 15-20 MB of RAM at startup depending on what applications you
have running.
• CD-ROM firmware. Even if a CD-ROM drive is new, it may require a firmware update
from the manufacturer to correct audio extraction errors.
• Overclocking. Overclocking the system — running it faster than it is rated to run —
can have adverse effects on the peripheral components. If your system is over-
clocked, bring it back to its normal operating speed.
Problem Solution