Operation Manual

Index

Getting Started

Contents

Rio S50 Digital Music Player

Step 4: Connect USB

1 Insert the USB cable into the MULTIFUNCTION

port on top of the Rio player. The Rio USB con-

nection only fits one way. Do not try to force the

connection.

2 Connect the other end of the USB cable to your

computer’s USB port.

3 Turn your Rio player ON.

Note: The player automatically turns OFF

after being connected to USB for 30

minutes, if no USB commands are received

or no buttons are pressed.

4 PC ONLY: Follow these instructions if the Win-

dows Device Driver wizard displays on the com-

puter screen: Make sure that the software CD is

in your computer’s CD-ROM drive. When the wiz-

ard prompts you for the location of the Rio player

drivers, select the “CD-ROM Drives” check box,

then click the “Next” button, and follow the on-

screen instructions.

Step 5: Rip/Load Music

Please see the Using the Music Management Soft-

ware section in this manual for more information

about using the software to encode your audio CDs

into compressed digital audio format, organize your

digital audio collection on your computer, or down-

load music to your Rio player. Please refer to the

complete software online Help for detailed informa-

tion on using each software application.