Instruction manual

84
Store Operation
10. Start a measurement. When it  nishes, a con rmation screen will
be displayed. Select “Store data” and press the MENU/ENTER key
to store the processing results.
The store process takes about 1 second. When it is completed, the
address is incremented by one step. The stored data includes the
following information: date and time when processing was started,
measurement time, frequency weighting, time weighting (dynamic
characteristics), conditions and processing results, overload and un-
der-range information, other information.
The T-L (time-level graph) display screen is not stored.
Important
Any measurement data present in the currently
displayed address will be overwritten. If the
address is shown in red, it contains data. Take
care not to accidentally overwrite data.
Note
When the number of address for storing data is
1000, it will not be incremented and it  ashes on
the display.
If you change the address with the or key in
this condition, the  ashing will stop, and data can
be stored in the newly selected address.