Instruction manual

87
Store Operation
6. Specify the store name.
6-1. Use the
keys to select [Store name] and press the MENU/
ENTER key. The store name screen appears.
6-2. Use the
keys to select the  rst two digits, and use the
keys to set the value.
6-3. Use the
keys to select the  nal two digits, and use the
keys to set the value. Then press the MENU/ENTER key.
7. Set the total measurement time.
7-1. Use the
keys to select [Total Measurement Time] and press
the MENU/ENTER key. The total measurement time screen ap-
pears.
7-2. Use the
keys to select the total measurement time (10s, 1min,
5min, 10min, 15min, 30min, 1h, 8h, 24h, Manual) and press the
MENU/ENTER key.
7-3. When “Manual” is selected, [User setting] is displayed on the
store screen. Press the MENU/ENTER key.
7-4. The total measurement time setting screen appears. Set arbitrary
total measurement time (At most for 1,000 hours).
8. Set the L
p
store interval.
8-1. Use the
keys to select [L
p
Store Interval] and press the
MENU/ENTER key. The L
p
store interval screen appears.
8-2. Use the
keys to select the L
p
store interval (OFF, 100ms,
200ms, 1s, [Leq, 1s]) and press the MENU/ENTER key.
If the L
p
store interval set to OFF, L
p
is not stored.
9. Set the L
eq
calculation interval.
9-1. Use the
keys to select [L
eq
Calculation Interval] and press
the MENU/ENTER key. The L
eq
calculation interval screen ap-
pears.
9-2. Use the
keys to select the L
eq
calculation interval (OFF, 10s,
1min, 10min, 15min, 30min, 1h, 8h, 24h, Manual) and press the
MENU/ENTER key.