Instruction manual

93
Store Operation
9. Set the start time. The measurement is started at the preset start
time.
9-1. Use the
keys to select [Start] and press the MENU/ENTER
key. The start time setting screen appears. When the start time
setting screen is displayed for the  rst time, current time is indi-
cated.
9-2. Use the
keys to select the setting parameter (year, month,
day, hour, minute), and use the keys to set the value.
9-3. Repeat the step 9-2. When all the settings are completed, press
the MENU/ENTER key.
10. Set the stop time. The measurement is stopped at the preset stop
time.
10-1. Use the
keys to select [Stop] and press the MENU/ENTER
key. The stop time setting screen appears.
10-2. Use the keys to select the setting parameter (year, month,
day, hour, minute), and use the keys to set the value.
10-3. Repeat the step 10-2. When all the settings are completed, press
the MENU/ENTER key.
11. Set the timer auto interval. The “timer auto interval” is the time
between measurements.
11-1. Use the
keys to select [Timer Auto Interval] and press the
MENU/ENTER key. The timer auto interval screen appears.
11-2. Use the
keys to select the timer auto interval (OFF, 5min,
10min, 15min, 30min, 1h, 8h, 24h) and press the MENU/ENTER
key.
12. Set the sleep mode (see page 59).
12-1. Use the keys to select [Sleep Mode] and press the MENU/
ENTER key. The ON/OFF setting screen appears.
12-2. When you use the sleep mode, select [ON] and press the MENU/
ENTER key.