Instruction manual

94
Store Operation
13. Press the START/STOP key. Measurement will start at the preset
start time. The measurement value will be stored automatically at
every interval set for L
p
store interval and L
eq
calculation interval.
When it is completed, the address is incremented by one step.
Measurement will stop at the preset stop time.
To stop the process earlier, press the START/STOP key.
Note
Relationship between elapsed measurement time
and number of data
When using Timer Auto mode and 100-ms sampling,
10 data sets are stored per second. Therefore, when
10 seconds of measurement time have elapsed, the
number of stored data is 100 (10 when using 1-sec-
ond sampling).
During Timer Auto mode, the pause function can-
not be used.
During Timer Auto mode, the address indication is
based on elapsed measurement time.
Marker
Same procedure as for Auto mode (see page 89).
Recalling stored data
Same procedure as for Auto mode (see page 90).
Deleting stored data
Same procedure as for Auto mode (see page 90).