Instruction manual

96
Store Operation
About SD memory cards
The memory cards that can be used in this unit are SD memory cards. Be
sure to use optional SD memory cards provided by Rion. SD memory cards
even from the same manufacturer and of the same type exhibit certain varia-
tions in speci cations which may cause problems. For this reason, be sure to
use only the SD memory cards provided by Rion. The performance of other
cards will not be guaranteed.
An SD memory card inserted in the unit will be recognized as a removable
disk by the computer when connected via USB, without having to install a
USB driver.
To make the connection, use a generic USB cable (standard A male to mini
B male connector). When not using the communication function, set the
Communication Interface to OFF from the [I/O] screen. When USB com-
munication is enabled, a message requesting installation of a USB driver for
USB communication will appear when the unit is connected to a computer.
Note
When using spreadsheet software or other programs
on a computer to retrieve data from SD memory
cards, some programs may not be able to read the
original  le names from the card. In such a case,
rename the  le using the extension “txt” (for example
“AU1_0001.txt”). For software that identi es  les
by the  le name extension, set the software up for
reading text  les.
If measurement data in the SD memory card is moved
to a computer and then moved back to NL-42/52,
the measurement date (time stamp) may be different
from the actual date.