Instruction manual

Store Operation

Data recovery

If an unexpected power failure occurs, the data may be damaged. In such

a case, turn the unit on without removing the SD memory card since the

unit is equipped with a data recovery function. However, please note that

the recovery of all data is not guaranteed. Formatting on a computer cannot

recover the data.

Example:

For the case of L

100 ms, the data of approximately up to the last 10

minutes can be recovered.

For the case of L

10 s, the data of approximately up to the last one

hour can be recovered.

However, note that the data may not be recovered depending on the

setting.

Formatting an SD memory card

Note

When an SD memory card is formatted (initialized),

all data present on the card will be lost.

In the following cases, you should format the SD memory card:

• Before using the SD memory card in the NL-42/NL-52 for the  rst

time

• If the NL-42/NL-52 does not seem to recognize an inserted SD

memory card

• When wishing to delete all data from the SD memory card

To format an SD memory card, proceed as follows.

1. Select [Card Format] on the [SYSTEM (Language)] screen and press

the MENU/ENTER key.

2. The con rmation screen appears. Press the MENU/ENTER key.

Note

When formatting the SD memory card in a computer,

select FAT or FAT32 as  le system.