Instruction manual

106
Setup Files
Resume function
When power to the unit is turned on, the measurement screen appears. The
settings active at this point are the same as were selected before the unit was
last turned off (resume function).
Note
When the unit is started while a start up  le exists in
the internal memory, the start up  le load function (see
the following description) will be executed  rst.
Loading a start up  le at startup
When the unit is turned on while a start up  le exists in the internal memory,
a screen asking whether or not to start the unit with the start up  le is dis-
played (start up  le load function).
Selecting [Yes] at the screen will load the start up  le.
Selecting [No] at the screen will cause the resume function to re-establish
the same settings as before the last time the unit was turned off.