Instruction manual

111
Setup Files
Setting a start up  le
When a setting is saved in a start up  le, the unit can be started using the
setting.
1. Set the unit to the intended condition, so that measurement parameters
and other settings are as desired.
2. Use the
keys to select [System (Language)] and press
the MENU/ENTER key. The system screen appears.
3. Use the
keys to select [Read/Save setting] and press the MENU/
ENTER key. The setting operation screen appears.
4. Use the
keys to select [Startup File None] and press the MENU/
ENTER key. The setting  le processing screen appears.
Note
When a start up  le has already been saved, select
[Startup File Data is available]
5. Use the
keys to select [Save the setting] and press the MENU/
ENTER key.
When “The setting was saved” is displayed, it means that the saving
process has been completed.
Note
When selecting [Startup File Data is available] to
overwrite the data, select [Yes] on the con rmation
screen.