Instruction manual

Reading the Display

DC OUT

Displays the screen to select whether to output the DC signal from the

DC OUT connector of the unit.

Select [DC OUT] and press the MENU/ENTER key. The ON/OFF setting

screen appears (see page 101).

Use the keys to select the ON/OFF setting and press the MENU/

ENTER key.

Comparator

Displays the screen to set the comparator signal output (open collector

output can be used to control external equipment) from the I/O connec-

tor of the unit.

Select [Comparator] and press the MENU/ENTER key. The comparator

screen appears (see page 31).

Note

When the optional Extended Function Program

NX-42EX is not installed, the comparator cannot

be selected.

Communication Interface

Displays the screen to select a type of communication with a computer

or printer to be connected to the unit.

Select [Communication Interface] and press the MENU/ENTER key. The

communication interface screen appears.

Use the

keys to select the communication type (OFF, USB, RS-232C)

and press the MENU/ENTER key.

Baud rate

When [Communication Interface] is set to “RS-232C”, this item is dis-

played.

Displays the screen to select the baud rate value.

Select [Baud rate] and press the MENU/ENTER key. The baud rate

screen appears.

Use the keys to select the baud rate value (9600bps, 19200bps,

38400bps, 57600bps, 115200bps) and press the MENU/ENTER key.