Instruction manual

72
Measurement
7. Use t he keys to select [ON] and press the MENU/ENTER
key.
Press the PAUSE/CONT key to return to the menu list screen.
8. For information about how to store data, refer to the section starting
on page 79.
9. Set the measurement time.
Use the
keys to select [Store] and press the MENU/
ENTER key. The store screen appears.
10. Use the
keys to select [Store Mode] and press the MENU/EN-
TER key. The store mode screen appears.
11. Use the
keys to select [Manual] and press the MENU/ENTER
key.
12. Use the
keys to select [Measurement Time] and press the
MENU/ENTER key. The measurement time screen appears.
13. Use the keys to select the measurement time (10s [second], 1min
[minute], 5min, 10min, 15min, 30min, 1h [hour], 8h, 24h, Manual)
and press the MENU/ENTER key.
When “Manual” is selected, arbitrary measurement time can be set
(At most for 24 hours).
Press the PAUSE/CONT key to return to the menu list screen.
14. If necessary, set the delayed measurement time. When START/STOP
key is pressed, measurement will start after the preset delayed mea-
surement time.
Use the
keys to select [Measure] and press the MENU/
ENTER key. The measurement setting screen appears.
15. Use the
keys to select [Delay Time] and press the MENU/EN-
TER key. The delay time screen appears.