Instruction manual

Measurement

Additional processing value setting procedure

Set the sub channel according to the desired additional processing beforehand

(see page 28).

1. Press the MENU/ENTER key to bring up the menu list screen.

2. Use the

keys to select [Measure] and press the MENU/

ENTER key. The measurement setting screen appears.

3. Use the

keys to select [Sub Channel Settings] and press the

MENU/ENTER key. The sub channel settings screen appears.

4. Use the keys to select [Setting the Additional Processings] and

press the MENU/ENTER key. The setting the additional processings

screen appears.

5. Use the

keys to select the additional processing value (L

peak

, L

tm5

) and press the MENU/ENTER key.

The measurement value that cannot be selected is not displayed.

6. Press the PAUSE/CONT key to return to the menu list screen.

7. Use the

keys to select [Display] and press the MENU/

ENTER key. The display screen appears.

8. Select the additional processing value set on the [Setting the addi-

tional processings] and press the MENU/ENTER key. The ON/OFF

setting screen appears.

9. Use the

keys to select [ON] and press the MENU/ENTER

key.

10. Press the START/STOP key to return to the measurement screen.

Additional processing value measurement

The additional processing value will be displayed on the screen when the

equivalent continuous sound level measurement is performed.