Instruction manual

92
Memory Functions
2. When moving the cursor with the and keys, the frequency and level displayed
at the right of the screen changes.
The level-time display contains the following information.
1. Use the INC and DEC keys to select the memory address from which you want to
display data.
2. Use the LEVEL UP/DOWN ( LT / LT ) keys to select the display compres-
sion ratio.
Pressing the LT key widens the address range, and pressing the LT key
narrows it down.
3. Use the and keys to select the frequency band.
When the compression ratio is 1/2 or higher, data for two or more addresses are shown at
the cursor line. Address data are expressed by drawing a line from the highest to the lowest
level.
When several address data are combined, the cursor shows the lowest (first) address and
the highest level of the combined addresses.
An example for 1/1 and 1/5 compression is shown below.