Instruction manual

93
Memory Functions
Auto (Frequency Analysis Mode) Group Store
Storing data in memory
The procedure for storing data in memory is described below.
1. Set the power switch on the side of the unit to ON and wait until the measurement
screen appears.
2. Press the MEMORY key to call up the MEMORY menu screen.
(For an explanation of how to use the MEMORY menu screen, refer to page 32.)
3. Set the "MEMORY BLOCK" item to "AUTO1" or "AUTO2".
4. Set the "AUTO STORE TYPE" to "GROUP".
5. Press the SETUP key to call up the SETUP menu screen.
6. Set "Leq Time", "TRIGGER MODE" and other items to the desired settings.