Instruction manual

137
Optional Accessories
Printing measurement parameters
1. Press the key for the desired menu (SETUP, MEMORY, DISPLAY, I/O).
2. Press the PRINT key to print out the current screen.
Printing the screen during measurement
Pressing the PRINT key causes a hard copy of the current screen (measured level, fre-
quency weighting, time constant, overload conditions etc.) to be printed out.
During store, the indication "AUTO STORE Now!!" is shown on the display for several
seconds. During this interval, printing is not possible.
During printing, the indication "1/1 Now Printing" is shown on the display, and the mea-
surement screen is not updated.
Printing in recall mode
Call up the I/O menu screen and select the print mode, memory block, start address, and
end address.