Instruction manual

Preparations

3. Use the and keys to move the flashing cursor to the "DATE" item. The cur-

rently set date (such as 96/04/08) is shown in the bottom left corner of the screen.

4. Use the and keys to move the cursor to the year, month, and day field. Use the

INC and DEC keys to set the numbers. Make the setting in the order year, month,

day, using two digits for each field.

Enter only the last two digits for the year.

5. When the setting is correct, press the ENTER key. The date is set and the cursor

moves to the "TIME" indication.

6. Use the and keys to move the cursor to the hour and minute field. Use the INC

and DEC keys to set the numbers. Enter the time in 24-hour notation.

7. When the setting is correct, press the ENTER key. At this point, the clock starts

moving from 00 seconds.

8. Press the I/O key once more to return to the previous screen.

If no backup battery is inserted in the unit, the indication "Backup Battery Empty!!" ap-

pears after turning on the power. Insert a backup battery as described on page 16. When

wishing to use the unit without a backup battery, simply press any key to make the indica-

tion disappear. In this case, the memory store function and date and time functions are not

available.

If the date and time are not set, the indication "RTC Read Error!!" appears after turning on

the power. In this case, use the I/O menu screen to set the date and time, as described on

page 24.