Instruction manual

Setting Measurement Parameters

Directory UP DOWN

z [ AU 1: 1 / 1 96 / 05 / 02 12:34:56 ]

[ AU 2: 1 / 3 96 / 05 / 04 11:22:33 ]

[ 001: 1 / 3 96 / 05 / 10 10:10:10 ]

[ 002: SPL 96 / 05 / 10 15:15:15 ]

[ 003: SPL 96 / 05 / 12 17:17:15 ]

[ 004: SPL 96 / 05 / 3 19:19:15 ]

[ 200: SPL 96 / 05 / 25 15:15:15 ]

Indicates the type and store date and time of data in the mass memory.

The date/time is indicated as follows.

AU1, AU2: Auto store start date/time/The date/time is indicated as follows.

001 to 200: Date/time when STORE key was pressed for the respective address.

1. Use the LEVEL UP/DOWN keys to scroll the display.

2. The currently selected data block is marked with a black circle (z).

3. Move the cursor to the desired block and press the ENTER key to select the block.

DISPLAY menu screen

MAIN ADD DISP: OFF Lmax / Lmin

When "Lmax / Lmin" is selected, the maximum and minimum

sound pressure level is always displayed in sound pressure

level measurement mode.

SUB DISP: OFF ON

Set to ON when wishing to display sub channel readings also.

ADD DISP: OFF Lmax / Lmin Ltm3 / Ltm5

PEAK DISP: OFF ON

Selects additional items to be displayed for the sub channel.

Lx SELECT L1: OFF ON

L5: OFF ON

L10: OFF ON

L50: OFF ON

L90: OFF ON

L95: OFF ON

L99: OFF ON

Lmax: OFF ON

Lmin: OFF ON

Leq: OFF ON

Selects the items for L

processing. Up to five items can be

selected simultaneously.