Instruction manual

Trigger Function

Time trigger

TIME TRG (Measurement start time): 00 h 00 m to 23 h 59 m in 1 minute steps

PERIOD (Measurement repeat interval): 0 h to 24 h in 1 hour steps

1. Set the measurement start time with the "TIME TRG" item.

2. Set the measurement repeat interval with the "PERIOD" item.

z When PERIOD is set to "0 H", the measurement is performed only once at the

preset time.

z When PERIOD is set to a value smaller or equal to the measurement time, trigger

events within the measurement time are disregarded.

An example for the time trigger operation is shown below.

Measurement start time: 1 h 30 m

Measurement is performed every 2 hours after that.