Instruction manual

78
Memory Functions
Manual (Sound Pressure Level Mode)
Storing data in memory
At the point where the STORE key is pressed, the current instantaneous value and the
various processing results are stored in memory. The procedure is as described below.
1. Set the power switch on the side of the unit to ON and wait until the measurement
screen appears.
2. Press the MEMORY key to call up the MEMORY menu screen.
(For an explanation of how to use the MEMORY menu screen, refer to page 30.)
3. Set the "MEMORY BLOCK" item to "MANU".
4. Press the SETUP key to call up the SETUP menu screen.
5. Set "Leq Time", "TRIGGER MODE" and other items to the desired settings.