Instruction manual

84
Memory Functions
Auto (Sound Pressure Level Mode) Group Store
Storing data in memory
The procedure for storing data in memory is described below.
1. Set the power switch on the side of the unit to ON and wait until the measurement
screen appears.
2. Press the MEMORY key to call up the MEMORY menu screen.
3. Set the "MEMORY BLOCK" item to "AUTO1" or "AUTO2".
4. Set the "AUTO STORE TYPE" to "GROUP".
5. Press the SETUP key to call up the SETUP menu screen.
6. Set "Leq Time", "TRIGGER MODE" and other items to the desired settings.