Instruction manual

88
Memory Functions
Reading from memory
The procedure for reading data from memory is described below.
1. Press the RECALL key.
2. Use the INC and DEC keys to select the memory address from which you want to
display data.
3. Use the OPE MODE key to select the processing type for display (L
C
, L
max
etc.).
An example for recalled 1/3-octave analysis data is shown below.
The date/time shown on the display is the processing start date/time.
To check the date/time when the STORE key was pressed, use the "Directory" item
on the MEMORY menu screen.
4. When moving the cursor with the and keys, the frequency and level displayed
at the right of the screen changes.