User Manual

STEP 85

Tighten the second wing tube retaining screw. Ensure that you do not

over-tighten the screws.

STEP 86

With the model standing on its nose, connect up the aileron extension leads

and locate the lower wing in its seat. Guide the two interplane struts into their

strut mounts in the underside of the upper wing.

STEP 87

Install and tighten the nylon wing retaining bolts.

STEP 89

With the ailerons centred and the

surfaces level, complete the aileron

linkage rods by bending the rod at

90°, connecting to the link horn and

fitting a nylon keeper.

STEP 88

Retain the interplane struts in the upper wing using the bolts, washers and

nyloc nuts supplied.

STEP 84

Now slide on the second wing panel ensuring it butts together to give a

gap-free join