Use and Care Manual
–10–
ENGLISH ESPAÑOL FRANÇAIS
OTHER FUNCTIONS
PROGRAMMING A PLAYLIST
The boombox can be programmed to remember up to 20 tracks, as follows:
1. While stopped in CD, SD, or USB mode, press the PROGRAM button.
2. Use or to select the desired track.
3. Press PROGRAM again.
4. Repeat the process to store up to 20 tracks.
To exit PROGRAM mode and return to normal mode, press STOP twice.
OTHER PLAYBACK FUNCTIONS
• During CD or MP3 playback, press Folder+/10+ to skip ahead by 10 tracks.
• During USB/SD playback, press and hold Folder+/10+ to skip to the next
folder on the media.
• Press the RANDOM button to play tracks from CD, SD or USB in random
order. This does not working when listening to a playlist of programmed
tracks, however.
• Press REPEAT once to loop the current song repeatedly. Press REPEAT
a second time to repeat ALL tracks on the CD or USB/SD directory. Press
the REPEAT button a third time to disable repeating. When repeat is dis-
abled, playing will stop after all tracks have been played.
CARE AND MAINTENANCE
CLEANING THE BOOMBOX
• UNPLUG THE UNIT BEFORE CLEANING. Use a so, damp cloth to clean the
outside. Do not wipe any internal parts or get them wet. Soapy water should
be suicient. Do not use any abrasive cleaning agents.
DISC HANDLING
• Do not expose discs to heat, direct
sunlight, or high humidity environ-
ments. In warmer weather, do not
leave discs inside a parked vehicle.
• Do not touch the disc surface
while handling the disc.
Instead, hold the edges.
• Fingerprints, dust, dirt, and
scratches can distort the sound
quality on your disc, or cause play-
back to skip. Beware of scratch-
es on the disc inhibiting the laser
beam system from reading and
playing the disc correctly. Clean
discs before use.
• Do not use paper, tape, or adhesive
labels on discs. Only use permanent
makers on the top side of the disc.