User Manual

3
Touchscreen Keypad
Introduction
RISCO Group's Touchscreen Keypad is a slim and contemporary designed 7" touchscreen keypad
for the ProSYS Security System. The Touchscreen Keypad is compatible with any ProSYS version
and is available with or without a proximity reader. The Touchscreen Keypad enables to control
your security system as well as program its features.
For detailed information on programming the system refer to the ProSYS Installer and User manuals.
Installation
For the ProSYS Touchscreen installation procedure, refer to page 2.
Indicators
On
System is operating properly from AC power and backup
battery is in good condition
Off No power
Slow Flash System is programming
Power
Rapid Flash System trouble
On System is armed in Full Arm or Stay Arm mode
Off System is disarmed
Slow Flash System is in Exit Delay
Arm
Rapid Flash Alarm condition
On
System is in Stay Arm or Zone Bypass mode
Note:
The icon is equivalent to the icon on other ProSYS
keypads.
Stay/
Bypass
Off No bypass zones in system
On System is ready to be armed
Off System is not ready to be armed
Ready
Slow Flash
System is ready to be armed while exit/entry zone
remains open
On Fire alarm in progress
Off Normal operation
Fire
Flashing Fire circuit problem
On Zone/keypad/external module has been tampered
Tamper
Off All zones are operating normally
Proximity Flashing Indicates that the keypad has a proximity reader