User's Manual

Recording
1. 7 Volume+, Volume-
the buttons on top Volume+,, Volume-achieve changes in the volume.
1. 8 earphone jack
3. 5 mm standard earphone jack.
1.9 Video output interface
HDMI output interface
1. 10 TF card
TF-CARD jack: external T-FLASH card
1.11 Mini USB
Mini-USB jack: you can use it to connect the computer for data transmission, charging and
external connection USB flash drive.
1.12 Recovery
When the Tablet under the condition of the crash, upgrade firmware.
2. First use
2.1 Battery management and charge
Before first use, please set the device's battery is fully charged.
Just need to connect the adaptor or USB interface, then you can charge.
The first two times charging please keep about 6 hours, after that you just need.
4 hours to charge.
【 Remark 】 This tablet using Built-in type polymer battery, Charge must be to choose
standard adaptor(lnput:AC110-240V 50/60Hz Max:180MA. Output: DC5.0~5.5V/1.5A), this
device without supply DC charging, USB interface can charge, Choose USB interface to
charger.
During the charging, the battery icon will scroll
When finished charging, battery icon will become green and stop rolling
In order to prolong the service life of the machine, suggest use out battery power before
charge it.
【Remark】 1. If you long time don’t to use this Tablet, in order to avoid power consumption
caused damage, please charge/play the battery once a month.
2. After low battery shut down connect DC adaptor, device will remind low battery,
charging, need to wait some time until the battery is enough power to enter into main menu.
3. Device charging should be in standby status for reach normal charging time.
Because with device and screen consumption, it may cause longer charging time.
2.2 Connection with PC
U Use USB cable to connection window, click Turn connect device to PC, device will on USB
storage to connect to PC.