Instructions / Assembly

Description QTY Appearance
Frame with Handle
1
Frame without Handle
1
Top/Bottom
Rails & Expanders
2
48” x 84” Roll of Screen Mesh
1
Strike and Screw Set
1
Roll of Spline
1
Bugstrip
1
Spline Roller
1
Tension Springs
2
No. 8 x 3/4” Pan Head
Screws (corner screws)
8
No. 8 x 3/8” Truss Head
Screws
4
CONTENTS INCLUDED:
TOOLS REQUIRED/RECOMMENDED:
Phillips Screwdriver
or Drill
Safety Glasses
Pliers
Utility Knife
Ultimate Knock-Down Door Kit Assembly Instructions
INSTRUCTIONS FOR ASSEMBLY OF YOUR PATIO SCREEN
(Tools required: Philips head screwdriver/drill, Utility knife, safety glasses/goggles, pliers, roller tool (supplied))
USE SAFETY GLASSES/GOGGLES FOR EYE PROTECTION DURING SCREEN ASSEMBLE
STEP 1……..Remove the outside handle from the long side piece by removing the 3 screws and set screws aside to be
reinstalled later (FIG. 2). (NOTE: Inside handle will now be loose).
STEP 2……..Remove expanders that are taped inside the short top & bottom rail pieces (FIG. 3) and fasten top/bottom
rails to long side pieces (FIG. 4).
Figure 3
Figure 4
Expander Containing Rollers
Remove these three
handle screws
Install Corner Screws
Figure 2