Operation 8022C MP SET TE HEAT F PM FAN OFF L COO ON AUTO EAT H SET TE MP HEAT F PM FAN OFF HEA L COO ON AUTO T Customer Support: 888-515-2585 or Visit our webiste www.ritetemp-thermostats.
Operation 8022C TEMP UP Time/ Current Temp AA Battery Compartment Display button Control Panel - Cover Closed TIME SDP P TEM UP ERY BATT E HOM SET TIME E OT SL E TIM TP NEX DAY M GRA PRO TEMP SET TIM CK CLO SET ER FILT W IE REV LD P HO TEM COPY FAN ET RES Fan Switch P SET TEM PM DE MO PM FAN OFF COOL Fan Switch Set Temp TEMP DOWN Display button PG 1 Heat/Cool Mode Switch ON AUTO HEAT Reset button N DOW Mode Switch Statement of use: The GPMG8022c can be used with m
2 Auto-run TM This Thermostat comes preprogrammed with an Energy-Star approved program. This program is recommended by the EPA for SET TEMP energy efficiency. We strongly recommend that you Auto-Run this program for one week, and see if it works for you. If it does not fit your needs you can always input a custom program. TM To Auto-Run the Energy-Star program, select HEAT or COOL with the mode switch. The unit is now running the Energy-Star program.
3 Program cont. Select the next TIME SLOT and program temp and time: Press NEXT NEXT>,P the display will show P2, for Period 2. Repeat setting temp and time. Select the remaining TIME SLOT's, P3 and P4. Program their temp and time info. DAY Repeat the above procedures for each day of the week. Push DAY> button to cycle through the days. To COPY the program of the current day to another day, press COPY program once. COPY will display on the LCD.
4 Special Features SDP The "Special Day Program" can be used when you are unexpectedly home and need to activate this heat / cooling program just for the day. With the MODE switch in HEAT or COOL press the SPECIAL DAY button to activate. When the SPECIAL DAY Program is active, all other day settings are all ignored even if the day is matched. The SPECIAL DAY program will terminate when the mode switch is moved or if the SPECIAL DAY button is pushed again. SET TEMP PG 7 4 Spec. Featr. cont.
4 Spec. Featr. cont. TEMP HOLD To change and hold the temperature until you return. Open the door and push the TEMP HOLD button. The HOLD icon comes on. Push the UP or DOWN arrow buttons to set the hold temperature. HOLD is canceled if the MODE switch is moved, or press TEMP HOLD again. Filter The life of a heater filter varies depending on many factors, furnace run time, and this will vary from the filter life noted on the filter media.
C or F display Centigrade / Fahrenheit selection. The C/F jumper is on the back of the thermostat control unit. Separate the control unit from the wall mounted terminals. When changed, the thermostat must be reset to activate the change. When resetting, all custom settings and programming will be erased and only the Energy-Star program will remain. 12/24hr TM o o C - F jumper jumper 12/24 hour The thermostat can display time in 12 or 24 hour formats.
