Owner's Manual

2 Auto-run
This Thermostat comes preprogrammed with an Energy-Star
TM
approved program. This program is recommended by the EPA for
energy efficiency.
We strongly recommend that you Auto-Run this
program for one week, and see if it works for you. If it
does not fit your needs you can always input a
custom program.
.
To Auto-Run the Energy-Star
TM
program, select HEAT or COOL with the mode
switch. The unit is now running the Energy-Star
TM
program.
.
The clock and the ambient temperature are displayed on the right.
They alternate every 2 seconds. One of the TIME SLOT icons P1/P2/P3/P4
comes on, this indicates the TIME SLOT active in the Energy-Star
Tm
program.
.
The programmed temperature is shown on the left. For program details refer to
the Energy-Star
TM
program chart below.
3 Program
.
Select HEAT with the HEAT/Cool MODE switch.
.
Select the day you want to program: Press the
PROGRAM to enter programming mode. The
PROGRAM FOR icon will come on. The day icon will
show SU (Sunday). Pressing again will
advance the day selection.
.
Select the TIME SLOT you want to program: To change the TIME SLOT
( P1, P2, P3, P4 ) press the NEXT button. The display will cycle through the
time periods in sequence. Select P1.
.
Select the desired temperature for that TIME SLOT : To change the
temperature for that TIME SLOT press the TEMP UP / TEMP DOWN
buttons.
NOTE: 60 Second Rule-During programming, if a button is not pushed
within 60 seconds, the unit will go out of the set mode. Everything you have
input in this programming will automatically be saved.
NEXT
P
DAY
PG 3
PG 4
All Days  70
o
F    62
o
F  70
o
F  
P1
6:00am
HEAT
P2
8:00am
P3
6:00pm
P4
10:00pm
All Days  78
o
F    85
o
F  78
o
F 
P1
6:00am
COOL
P2
8:00am
P3
6:00pm
P4
10:00pm