Owner's Manual

DOWN-Arrow
button
UP-Arrow
button
Swing
Manual
.
With the MODE switch in HEAT or COOL, push the UP or
DOWN arrow buttons to temporarily change the control
temperature by 1 degree per step. Press and hold for faster
setting.
.
The OVERRIDE icon comes on which shows the displayed
temperature may be different from the programmed setting.
.
The OVERRIDE is canceled at the start of the next time period,
or when the MODE switch is moved, or if TEMP HOLD is pressed again.
TEMP HOLD
To change and hold the temperature until you return.
.
Open the door and push the TEMP HOLD button. The HOLD icon comes on.
Push the UP or DOWN arrow buttons to set the hold temperature.
.
HOLD is canceled if MODE switch is moved, or by pressing TEMP HOLD again.
Back Light
.
Press the Back light button for 6 sec of light. Press and hold for longer light.
PG 7
PG 8
SDP
4 Special Features
.
The "Special Day Program" can be used when you are
unexpectedly home or going onvacation and need to
activate an alternate heat / cooling program.
.
With the MODE switch in HEAT or COOL press the
SPECIAL DAY button.
.
When the SPECIAL DAY Program is active, all other day settings are ignored
.
The SPECIAL DAY program will terminate when the mode switch is moved or if the
SPECIAL DAY button is pushed again.
.
Swing setting determines the temperature difference from ON
to OFF that the thermostat will command the heating/cooling
system to run.
.
With the MODE switch in HEAT or COOL, press the
button.
.
The SET TEMP SWING icon is displayed. The current setting of temp swing is shown on
the display (default at 3 ).
.
To change the swing, push TEMP UP or TEMP DOWN buttons. The furnace will cycle
more at the lower numbers as it tries to keep your set point constant.
.
To complete the swing setting, push the HOME button.
TIME
4 Special Features cont.