User's Manual

OUTPOST Wireless Callbox Advanced Features

Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com

HOW TO SEAL THE ANTENNA

If the OUTPOST Callbox is to be used outdoors it is

imperative that the entire antenna connection be

sealed with seal tape to provide proper operation and

prevent voiding warranty.

Seal tape can be purchased at most Industrial Supply

Stores, Harware and Home Center Stores, or

Electronic Supply Stores.

Regarless of the antenna used, it is always best to

weatherproof the antenna connection using seal tape.

NOTICE

Failure to follow these instructions will

cause damage to the product, prevent

proper sealing of the enclose and will

void the Manufacturers Warranty.

Applying Seal Tape:

1. Attach the antenna to the 50Ω BNC connector on

the OUTPOST Callbox enclosure.

2. Begin wrapping seal tape at the base of the

antenna connector such that it is sealed to the

enclosure top.

3. Overlap the seal tape as you tightly wrap upward

around the connector and antenna. Continue to

overlap seal tape around the connector base,

past the articulated portion of the antenna and

several inches up the thin, shiny section of the

antenna.

AFB-1545 An-

tenna before

sealing

Wrap tape

from bottom,

sealing to

enclosure.

Overlap

sealing tape

(1) inch be-

yond the

rigid section

of the an-

tenna

AFB-1545 An-

tenna after seal-

ing